Fixes: - Add UDP session time out setting on GUI, Firewall > Session Control page. - GUI filter in Firewall (need to match “any” rule when choose “Zone”) - PPTP throughput enhancement - Allow static route to configure the default route 0.0.0.0 - Update EPS signature file version 1.0.0.13 - The new EPS signature file adds signatures for the following new firewall and anti-virus software support. - New Firewall software: - New Anti-Virus software: - After upgrade to 3.00 FW, "adjust-mss auto" will append automatic. - After rebooting,Tunnel Interface/Bridge/Virtual Interface IP can not save to 192.168.200.1 - The user is authenticated via AD server, and the username contains a spaces(eg. Rizhong Cheng). If the user tried to log in SSL VPN, it will be treated as a USG user. - The Port Statistics Grid View show abnormal graphic - DDNS-Module shows missing Iface. - USG 100 App patrol "MSN" use "From" criteria will causing policy inacitve - Service Object abnormal delete - USG300 Bug2 l2TP using wrong Port for LDAP authentication - BWM rule set the outgoing interface to IPSec Tunnel has error. - Firewall rule doesn't work normally with empty object - USG-100 3G doesn't disconnect (After fallback to primary WAN, DNS query will still keep on passive WAN) - USG20. PPPoE is not up. - Receive mail from webmail site will not show complete subject - CF URL test failed. - Probleem met 3.00 firmware - clients can't use L2TP passthrough to internet after update to 300AQU0ITS-r32927 - [E] USG-200 / L2TP LDAP - USG-100 IPsec tunnel suddenly cannot be established anymore - After upload file to device, file_upload-cgi is dead. - USG 1000 Crash - [E]USG series not accepting MS Windows ICS DHCP Lease - Content Filter will pop out error message. "System internal error. Invalid service" - L2TP can not build after device reboot. - USG-1000 / L2TP User Auth will fail after 2 Weeks - USG-300 / ZySH Daemon Issue, VPN can't build up and DSL disconnect Issue since Patch 4 Weekly - pro daemon dead after SSLVPN-Dial-in fail with FQDN - After using IPSec/SSL VPN for a long time, the throughput drop and finally no more traffic can be encrypted/decrypted. - USG-1000 / 400 L2TP VPN’s after upgrade to v3.00 cause issue - Downloading large amount of emails outlook email dump fail - USG-1000 / 400 L2TP VPN’s after upgrade to v3.00 cause issue - LAN1 will stop distributing IP once LAN2 is changed to DHCP Relay - USG1000 - Reboots automatically two times per day. - L2TP TCP MSS adjustment does not work. - L2TP Query DNS fail - L2TP error log USG Send:[HASH][NOTIFY:INVALID_SPI] - Fax-machine using the SIP protocol does not work. - Usg1000 - L2TP-clients behind NAT - If the SIP ALG turn on, from [additional branch] to [branch ] or [branch] to [branch], one-side hearing. - After device root, Sierra 305 cannot be detected. - When login as User on USG, get sometimes the message: \"You will be redirected to the login page due idle timeout or network problem.\" - USG-300 / Crash after 30 Minutes and no Login possible. - Adding a policy route to allow L2TP to access the internet via USG; however, it will be failed. PPPoE is fine, but PPTP will be failed. - The monitor of users will show wrong Ips. - PC remove ZyWALL SecuExtender , PC will crash. - NAT Traversal reactive when reboot - SMTP name enlarge from 30 -->60 (USG-50 / System Mail Log) - TCP port 53 default is on (USG-100 / QNAP Virus) - IPSec VPN nailed-up Fail - USG 100 - L2TP Authentication - System won’t redirect http to https if http server is not listen to port 80. - Changing SSL VPN config will effect Zone setting. - ZySH / Quick Sec Crash and all Tunnels disconnect - [E] USG-1000 / IP-SEC Modul - USG300 - VPN Issue - IPSec VPN adjust MSS does not work. - USG 300 reboots with coredump - NAT-T will auto enable, after upgrade from 2.20 to 3.00 - [E] USG-100 Site to Site VPN and deactivate Tunnel Issue - VPNs Unstable - [E] USG-1000 / Crash again and Certificate Tunnel can't recover - VLAN interface command saves at wrong CLI group id. - Connectivity check fail by using TCP when target is not in same subnet with the interface. - Dynu dynamic dns service not working. - ZLD 3.0 / NAT-Traversal setting not saved to config file. - Interface IP cannot modify anymore after using duplicate IP with SSL VPN IP. - USG-100 L2TP password error after update to 3.0 - Ping with a large size packet through IPSEC VPN tunnel will fail. - Duplicate domain zone in named.conf causes device fail to bring up named daemon. - ITS72194: USG-100 L2TP stress test leads to reboot - Apply ITS#71640 config of ZLD2.20 causes zyshd dead - After update 3.00 FW, Pre-Share key caused reboot device apply to default configure. - [Beta] Apply specific config file to device, it will take 40 minutes to finish it. - DDNS couldn't auto update per 28 days - BWM LAN to WAN UDP packet couldn't limit - L2TP and Auth. by ad-users does not work (BETA FORUM) - Device registration loss and Anti-X disable. - HTTP throughput is slow with Commtouch content filter - [E] USG-300 / L2TP Payload Issue - [E] USG-20W / L2TP cause Daemon crash - USG-1000 IPSec VPN Probleme Caritas
Скачать