APU FM2 Socket: - AMD A series processors - AMD Athlon series processors Chipset - AMD A75 Memory - 4 x 1.5V DDR3 DIMM sockets supporting up to 64 GB of system memory * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed. - Dual channel memory architecture - Support for DDR3 1866/1600/1333/1066 MHz memory modules - Support for AMD Memory Profile (AMP) memory modules Onboard Graphics APU: To use the onboard graphics ports, you must install an AMD APU with integrated graphics. - 1 x D-Sub port - 1 x DVI-D port, supporting a maximum resolution of 2560x1600 * Support for 2560x1600 resolution requires both a monitor and cable that support Dual Link DVI. * The DVI-D port does not support D-Sub connection by adapter. - 1 x HDMI port, supporting a maximum resolution of 1920x1200 Audio - Realtek ALC892 codec?? - High Definition Audio?? - 2/4/5.1/7.1-channel - Support for S/PDIF Out LAN - Realtek GbE LAN chip (10/100/1000 Mbit) Expansion Slots - 1 x PCI Express x16 slot, running at x16 (PCIEX16) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. ?? - 1 x PCI Express x16 slot, running at x4 (PCIEX4) - 3 x PCI Express x1 slots (All PCI Express slots conform to PCI Express 2.0 standard.) ?? - 2 x PCI slots Multi-Graphics Technology - Support for AMD Dual Graphics technology * Only A series APUs support AMD Dual Graphics. Storage Interface Chipset: - 6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices - Support for RAID 0, RAID 1, RAID 10, and JBOD USB Chipset: - Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header) - Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) Internal I/O Connectors - 1 x 24-pin ATX main power connector - 1 x 8-pin ATX 12V power connector - 6 x SATA 6Gb/s connectors - 1 x APU fan header - 3 x system fan headers - 1 x front panel header - 1 x front panel audio header - 1 x S/PDIF Out header - 1 x USB 3.0/2.0 header - 2 x USB 2.0/1.1 headers - 1 x serial port header - 1 x Clear CMOS jumper - 1 x Trusted Platform Module (TPM) header Back Panel Connectors - 1 x PS/2 keyboard/mouse port - 1 x D-Sub port - 1 x DVI-D port - 1 x HDMI port - 2 x USB 3.0/2.0 ports - 4 x USB 2.0/1.1 ports - 1 x RJ-45 port - 1 x optical S/PDIF Out connector - 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In) I/O Controller - iTE I/O Controller Chip H/W Monitoring - System voltage detection - APU/System temperature detection - APU/System fan speed detection - APU overheating warning - APU/System fan fail warning - APU/System fan speed control * Whether the APU/system fan speed control function is supported will depend on the APU/system cooler you install. BIOS - 2 x 64 Mbit flash - Use of licensed AMI EFI BIOS - Support for DualBIOS - PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a Unique Features - Support for @BIOS - Support for Q-Flash - Support for Xpress Install - Support for EasyTune * Available functions in EasyTune may differ by motherboard model. ???? - Support for Smart Recovery 2 - Support for Auto Green - Support for ON/OFF Charge - Support for 3TB+ Unlock - Support for Q-Share Bundle Software - Norton Internet Security (OEM version) Operating System - Support for Microsoft Windows 8/7/Vista/XP Form Factor - ATX Form Factor; 30.5cm x 22.5cm Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Скачать