Specifications: CPU - Support for Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package - L3 cache varies with CPU Chipset - Intel B75 Express Chipset Memory - 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. - Dual channel memory architecture - Support for DDR3 1600/1333/1066 MHz memory modules * To support DDR3 1600 MHz, you must install an Intel 22nm (Ivy Bridge) CPU. - Support for non-ECC memory modules Onboard Graphics Integrated Graphics Processor: - 1 x D-Sub port - 1 x DVI-D port, supporting a maximum resolution of 1920x1200 * The DVI-D port does not support D-Sub connection by adapter. - 1 x HDMI port, supporting a maximum resolution of 1920x1200 - 1 x DisplayPort, supporting a maximum resolution of 2560x1600 Audio - Realtek ALC887 codec - High Definition Audio - 2/4/5.1/7.1-channel * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. - Support for S/PDIF Out LAN - Realtek GbE LAN chip (10/100/1000 Mbit) Expansion Slots - 1 x PCI Express x16 slot, running at x16 (PCIEX16) (The PCIEX16 slot conforms to PCI Express 3.0 standard.) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. * PCIE Gen.3 is dependent on CPU and expansion card compatibility. - 1 x PCI Express x16 slot, running at x4 (PCIEX4) - 1 x PCI Express x1 slot (The PCIEX4 and PCIEX1 slots conform to PCI Express 2.0 standard.) - 1 x PCI slot Multi-Graphics Technology - Support for AMD CrossFireX technology Storage Interface Chipset: - 1 x SATA 6Gb/s connector (SATA3 0) supporting up to 1 SATA 6Gb/s device - 5 x SATA 3Gb/s connectors (SATA2 1~5) supporting up to 5 SATA 3Gb/s devices Marvell 88SE9172 chip: - 2 x SATA 6Gb/s connectors (GSATA3 6~7) supporting up to 2 SATA 6Gb/s devices - Support for RAID 0 and RAID 1 USB Chipset: - Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header) * In Windows XP, the Intel USB 3.0 ports can support up to USB 2.0 transfer speed. - Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) Internal I/O Connectors - 1 x 24-pin ATX main power connector - 1 x 4-pin ATX 12V power connector - 3 x SATA 6Gb/s connectors - 5 x SATA 3Gb/s connectors - 1 x CPU fan header - 1 x system fan header - 1 x front panel header - 1 x front panel audio header - 1 x S/PDIF Out header - 1 x USB 3.0/2.0 header - 2 x USB 2.0/1.1 headers - 2 x serial port headers - 1 x parallel port - 1 x Clear CMOS jumper Back Panel Connectors - 1 x PS/2 keyboard/mouse port - 1 x D-Sub port - 1 x DVI-D port - 1 x HDMI port - 1 x DisplayPort - 1 x optical S/PDIF Out connector - 2 x USB 3.0/2.0 ports - 4 x USB 2.0/1.1 ports - 1 x RJ-45 port - 3 x audio jacks (Line In/Line Out/Microphone) I/O Controller - iTE I/O Controller Chip H/W Monitoring - System voltage detection - CPU/System temperature detection - CPU/System fan speed detection - CPU overheating warning - CPU/System fan fail warning - CPU/System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. BIOS - 2 x 64 Mbit flash - Use of licensed AMI EFI BIOS - Support for DualBIOS - PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a Form Factor - Micro ATX Form Factor; 24.4cm x 24.4cm
Скачать