-Remove RTC Alarm item in BIOS setup because chipset dont support APM -Added CPU FAN detect item in BIOS setup -Support AMD XP 2000+ CPU -Added CPU Ratio item in BIOS setup As much as possible, please dont flash BIOS from 2.1 to 2.0 as there are users whose BIOS went dead after doing so. If user insists to do so, please use the flash utility awfl814B to flash from 2.1 to 2.0 Specifications: CPU • Supports Socket A for AMD Athlon/Athlon XP/ Duron processors • Supports up to 2600+ Chipset • nVIDIA nForce 420D Chipset - IGP-128 (Integrated Graphics Processor) - Support 200/266MHz FSB - Twinbank Memory Architecture/128-bit DDR memory controller - Integrated GeForceMX - Class advanced Graphics Processing Unit - AGP 4x support - Hyper Transport interface to MCP (800MB/sec max.) • nVIDIA MCP-D Chipset - Dual ATA/100 controller - Support USB UHCI 1.0a, provide up to six USB ports - IEEE 802.3 compatible MAC (MII) - Integrated Audio Processor Unit, AC'97 2.1 compliant - SPDIF output function - Dolby Digital Interactive Content Encoder FSB • 100/133(200/266)MHz clocks are supported. Main Memory • Support up to three DDR DIMMs • Maximum memory size up to 1.5GB • Support 128-bit system memory • NO support ECC Function. Slots • One AGP slot - Support AGP 2.0 2x/4x (1.5V only) • One CNR slot • Five PCI slots - 32-bit Master PCI 2.2 compliant - Support 3.3v/5v PCI bus interface On-Board IDE • An IDE controller on the MCP chipset provides IDE HDD / CD-ROM with PIO, Bus Master and Ultra DMA 33/66/100 operation modes. • Can connect up to four IDE devices. Audio • APU (audio processing unit) integrated in MCP - Support up to 256 hardware-processed voices or 64 hardware voice in 3D; support multi-speaker 3D audio. - 6 speaker Surround sound can be achieved by 2 means: • Digital thru a SPDIF speaker (e.g. Creative DTT3500) • Analog thru a CNR sound card (motherboard 2channel + CNR 4channel) Note: CNR card is not included. It is optional Video • 256-bit 2D/3D graphics accelerator • Supports the 2nd generation T&L engine, nVIDIA Shading Rasterizer • Supports TV-out daughter card Network • Chipset integrated10/100 Base-T Ethernet/Fast Ethernet On-Board Peripherals • On-Board Peripherals include: - One floppy port that supports two FDD with 360KB, 720KB, 1.44MB and 2.88MB - Two serial ports COM A+COM 2 (pin header) - One parallel port that supports SPP/EPP/ECP modes - One VGA connector - Six USB ports (2 x rear connectors and 2 x USB front pin header to support four ports) - One IrDA connector - One Audio/Game port - One D-Bracket pin header BIOS • The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically. • The mainboard provides a Desktop Management Interface(DMI) function which records your mainboard specifications. Dimension • 30.5 cm(L) x 22.5 cm(W) ATX Form Factor Mounting • 6 mounting holes.
Скачать