-Fix problem wherein when AC-Power lose, FSB will be set back to hardware default -Add x14 & x15 Ratio The "load High System Performance" is for powerful or overclocking users only. If the system crashes or hangs after enabling the feature, please CLEAR CMOS DATA to resolve the problem. For more information, refer to Clear CMOS Jumper:JBAT1 on manual page 2-30. Specifications: CPU • Support Socket A for AMD Athlon / Duron / Athlon XP Processors • Supports 600MHz ~ 1.4GHz processor • Supports Athlon XP 1500+ ~ 2000+ Processors Chipset • VIA VT8366 (552BGA) Chipset - FSB @ 200/266MHz - AGP 4x and PCI Advanced high performance memory controller • VIA VT8233 (376BGA) Chipset - High Bandwidth Vlink Client controller - Integrated Faster Ethernet LPC (Optional CNR card support) - Integrated Hardware Sound Blaster/Direct Sound AC97 audio - Ultra DMA 33/66/100 master mode PCI EIDE controller - ACPI FSB • Supports 100/133(200/266)MHz FSB Main Memory • Support six memory banks using three 184-pin DDR DIMM. • Support a maximum memory size up to 3GB. • Supports 2.5v DDR SDRAM DIMM Slots • One CNR (Communication Network Riser). • One AGP (Accelerated Graphics Port) or AGP Pro slot. Note : AGP Pro only for K7T266 Pro-R - AGP specifcation compliant. - Support AGP 2.0 1x/2x/4x • Five 32-bit Master PCI Bus slots. - Supports 3.3v/5v PCI bus Interface. On-Board IDE • An IDE controller on the VIA VT8233 chipset provides IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA 33/66/100 operation modes. • Can connect up to four IDE devices. Audio • Chip integrated (2 channel S/W audio) - Direct Sound AC97 Audio Promise 20265R On-Board • Support IDE RAID 0 or 1 - can connect a Master and a Slave drive to each IDE RAID connector. The two connectors support hard disk drives only. *Note: only the two Master Hard Disk Drives will adopt RAID function USB Interface • USB 2.0 HC On Board - Support 4 USB 2.0 ports via extemal bracket • USB PC2PC Networking Function - Controlled by USB PC2PC Controller - Supported by the JUSB2 pin header • 6 USB Ports - Controlled by VT8233 Southbridge - 2 rear ports and 4 port supported by JUSB2 & JUSB3 On-Board Peripherals • On-Board Peripherals include: - 1 Floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and 2.88M bytes. - 2 Serial ports (COM A+COM B) - 1 Parallel port supports SPP/EPP/ECP mode - 1 IrDA connector for SIR/ASKIR/HPSIR - 1 Audio/Game port BIOS • The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically. • The mainboard provides a Desktop Management Interface(DMI) function which records your mainboard specifications. Dimension • 30.4 cm(L) x 23.5 cm(W) ATX Form Factor Mounting • 6 mounting holes.
Скачать