- Cannot change BIOS "AGP Aperture Size" setting. - Cannot support VGA D.O.T with "Dynamic Overclocking" enabled. Specifications CPU • Supports Socket A for AMD Athlon/Athlon XP/Duron/Sempron processors @FSB 266/333/400MHz • Supports up to 3200+ processor or higher Please refer to CPU Support for compatible CPU; the above description is for reference only. Chipset • NVIDIA nForce2 400 Ultra Chipset - Supports DDR200/266/333/400 - AGP 8X and PCI Advanced high performance memory controller • NVIDIA nForce2 Gigabit MCP Chipset - Integrated Ethernet MAC - Integrated Hardware Sound Blaster/Direct Sound AC97 audio - Ultra DMA 66/100/133 master mode PCI EIDE controller - Supports USB 2.0 - Integrated SATA Interface Main Memory • Supports six memory banks using three 184-pin DDR DIMMs • Support Dual channel PC3200/2700/2100/1600 DDR SDRAMs • Supports both 64-bit and 128-bit DDR SDRAM • Maximum memory size of 3GB • Supports 2.5v DDR SDRAM DIMM Slots • One AGP (Accelerated Graphics Port) 1.5V 4X/8X slot • Five 32-bit PCI bus slots (support 3.3v/5v PCI bus interface) On-Board IDE • Two IDE controller on the NVIDIA nForce2 Gigabit MCP chipset provides IDE HDD/CDROM with PIO, Bus Master and Ultra DMA133/100/66 operation modes • Can connect up to four IDE devices SATA Interface • Integrated SATA Phy, supporting up to 2 ports • One SATA controller, supporting two drives in master mode NV RAID (Software) • Supports 2 serial ATA plus 1 ATA 133 - RAID 0, or 1, 0+1, JBOD is supported - Booting from RAID - Cross controller RAID support - Rebuilding on the Fly - Spare Disk Allocation • Supports Windows 2000 and later versions Audio • Chip integrated (5.1 channel H/W audio) - Direct Sound AC97 audio - 6 channel analog output - Digital SPDIF out signal compatible W/S-Bracket Network • On-Board 10/100/1000 Ethernet - A 802.3 NVIDIA MAC for 1000 BASE-T/100 BASE-T/10 BASE-T Gigabit/Fast Ethernet/Ethernet - RGMII for Gigabit/Fast Ethernet/Ethernet USB Interface • 8 USB ports - Controlled by Gigabit MCP southbridge - 4 ports in the rear I/O, 4 ports via external bracket On-Board Peripherals On-Board Peripherals include: - 1 floppy port that supports one FDD with 360KB, 720KB, 1.44MB and 2.88MB - 1 serial port - 1 parallel port supports SPP/EPP/ECP mode - 1 Audio jack(5-in-1), coaxial/fiber SPDIF out - 8 USB ports (Rear x 4 / Front x 4) - 1 RJ-45 jack - 1 D-Bracket2 pinheader BIOS • The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically. • The mainboard provides a Desktop Management Interface (DMI) function which records your mainboard specifications. Dimension • 30.4 cm(L) x 24 cm(W) ATX Form Factor Mounting • 9 mounting holes
Скачать